How to maintain salvia harvester in summer
Updated: 18/05/07 15:16:05 Source: xsshi.com
The use of Danshen harvester not only requires strict operation in accordance with specifications, but also maintenance. Plenty of rain in summer makes agricultural machinery vulnerable to rain and flooding. If the salvia harvester is not cleaned and maintained in time, it will seriously endanger the tractor's mechanical performance And service life. So how should we perform maintenance?
1. Clean the soil and weeds on the salvia harvester in time. Remove the exhaust pipe and clean the dirty cement sand inside.
2, cool body explosion-proof tires. In summer, the temperature is high, and the tire rubber is easy to age. Therefore, the harvester should check the tire pressure at any time during the driving. If the tire is overheated or too high, it should be parked in a cool place to cool down. Do not use cold water to splash, otherwise it will cause a flat tire on the way.
3. Clean the soil inside the salvia harvester. Dry the coil to check the insulation and conductivity. Apply butter to line cards and pole posts.
4. Do not place the salvia harvester directly in the open air to prevent rain and sun exposure. It can be placed under a shed or a reflective cloth for sun protection.
When using the salvia harvester, you should first check the fuselage for faults. If so, repair it in time. And all parts should be completely lubricated to prevent rust during storage. Instead, some parts should be removed and stored separately, such as removing the belt and storing it in a dry, cool room, removing the chain, and storing it properly after cleaning. Some transmission shafts can also be removed and stored.